BONUS ITEMS! Buy Cyberpower 1000VA/900W Tower UPS & receive these for free!
Keep your machine running with consistent power: Reliable power backup with the Cyperpower UPS
An Uninterruptible Power Supply (UPS) is essentially a high-powered battery. This UPS has three main parts: a power converter (AC-DC), a battery, and an inverter. Its job is to provide a steady and reliable flow of electricity. If the power coming in is too high or too low, the UPS evens it out, preventing sudden spikes or drops that could damage your equipment. It ensures a smooth and consistent power supply, keeping your devices protected and running without interruption. Simply plug it into a wall outlet, then connect your embroidery machine. If the power cuts out, the UPS instantly provides backup power, keeping your machine operational and preventing disruptions.
Power outages and voltage fluctuations can put your sewing & embroidery machines and projects at risk—but with an Uninterruptible Power Supply (UPS), you’ll have a reliable backup to keep your machine running smoothly.

Voltage Regulation – Shields your machine from harmful power surges and fluctuations that could damage sensitive electronics.
Protection Against Power Outages – Stay powered long enough to save your work or finish a crucial step, so you don’t lose progress or ruin a project.
Prevention of Data Loss – With up to 30 minutes of backup power (based on a single embroidery machine), you have time to shut down properly, avoiding errors or corrupted designs.

Battery
The amount of time the UPS can provide power depends on how much electricity your devices are using.
Half load (450 watts or 500VA): Runs for about 15 minutes
Full load (900 watts or 1000VA): Runs for about 5 minutes
For example, if you connect devices that use 450 watts (which is half of the UPS’s capacity), it will last 15 minutes. If you use the full 900 watts, it will run for 5 minutes before the battery is drained.
What's included
- OLS1000E UPS
- Power Cord
- USB Cable
- Phone Line
- User's Manual
Barcode: 4712856271300
Download technical specifications data sheet →
- Phase: Single Phase
- Form Factor: Tower
- UPS Topology: Online Double Conversion
- Energy Saving Technology: Online ECO Mode Efficiency > 95%
- Active PFC Compatibility: Yes
- Generator Compatibility: Yes
- Nominal Input Voltage ( Vac ): 230 ± 10%
- Input Voltage Range ( Vac ): 160 - 300
- Adjustable Voltage Range ( Vac ): 0-50% Load for 110 - 300 Vac | 0-60% Load for 120 - 300 Vac | 0-80% Load for 140 - 300 Vac | 0-100% Load for 160 - 300 Vac
- Input Frequency ( Hz ): 50 ± 10 | 60 ± 10
- Input Frequency Detection: Auto-sensing
- Rated Input Current ( A ): 4.5
- Input Power Factor: 0.98
- Input Connector Type: IEC C14
- Power Cord Length (m.): 1.8
- Output Capacity (Watts): 900
- On Battery Waveform: Pure Sine Wave
- On Battery Voltage(s) ( Vac ): 208 ± 1% | 220 ± 1% | 230 ± 1% | 240 ± 1%
- Output Voltage Setting: Configurable
- On Battery Frequency ( Hz ): 50 ± 0.5% | 60 ± 0.5%
- Output Frequency Setting: Configurable
- Power Factor: 0.9
- ECO Mode Voltage Tolerance: ± 15 %
- Overload Protection: Internal Current Limiting, Circuit Breaker, Fuse
- Overload Protection (Line Mode): 110-120% Load for 1 min, >120% Load Immediately
- Overload Protection (Battery Mode): 110-120% Load for 10 sec, >120% Load Immediately
- Overload Protection (Bypass Mode): >130% Load Immediately
- Crest Factor: 3 : 1
- Harmonic Distortion (Linear Load): THD?3%
- Harmonic Distortion (Non-linear Load): THD?5%
- Internal Bypass: Automatic Bypass, Manual Bypass
- Outlet(s) - Total: 4
- Outlet Type: IEC C13 x 4
- Outlet(s) - Battery & Surge Protected: 4
- Typical Transfer Time ( ms ): 0
- Runtime at Half Load ( min ): 15
- Runtime at Full Load ( min ): 5
- Typical Recharge Time ( Hours ): 5
- Maximum Charging Current ( A ): 1
- Start On Battery: Yes
- Smart Battery Management (SBM): Yes
- User-replaceable: No
- Battery Type: Sealed Lead-acid
- Compatible Extended Battery Module (EBM): BPSE36V45A
- Max. EBM Quantity ( pcs ): 3
- Surge Suppression ( Joules ): 440
- EMI/RFI Filtration: Yes
- Phone/Network Protection RJ11/RJ45 (Combo): 1-in, 1-out
- LCD Information Display: Operation Type, Power Status, Battery Status, Load Status, Fault & Warning, Other Information, Event & Log
- LCD Setting & Control: Mode Setting, Alarm Setting, Input & Output, Battery Setting
- HID Compliant USB Port(s): 1
- Emergency Power Off (EPO) Port: Yes
- Audible Alarms: Battery Mode, Low Battery, Overload, Overcharge, Overheat, UPS Fault, Replace Battery
- Management Cable ( pcs ): Power Cord x2, USB Cable x1, Phone Line x1
- Power Management Software: PowerPanel Business (Recommended)
- SNMP/HTTP Remote Monitoring: Yes - with optional RMCARD205
- Enclosure Construction: Metal
- Dimensions: 151 x 225 x 394mm
- Weight: 13.1kg
- Certifications: CE, RCM
Features:
- Online (Double Conversion) UPS Topology
- Generator Compatible
- Zero Transfer Time
- Extended Battery Module (EBM)
- EMI and RFI Filtration
- LCD Status Display
- PowerPanel Management Software
- ECO Mode
- Overload Protection
- Smart Battery Management (SBM)
- Surge and Spike Protection
- Phone/Fax/Modem/DSL/Network Protection
- Emergency Power Off (EPO) Port
- SNMP/HTTP Remote Management Capability (Optional)
SKU | CPOLS1000E |
---|---|
Barcode # | 4712856271300 |
Brand | CyberPower |
Shipping Weight | 14.5000kg |
Shipping Width | 0.240m |
Shipping Height | 0.310m |
Shipping Length | 0.510m |
Shipping Cubic | 0.037944000m3 |
2 Year Warranty